West Fork Fence

Probably the most difficult part, which still wasn't hard, was getting the ends anchored in the proper position.  It really didn't take long, once I got started. 

Mount bracket. 

Easy peasy. 

Had to cut off the standard threads, and TIG on the metric ends to match the Yanmar threads.

Directly under the threaded end of the control cable, is the selector lever for swapping from the front, to the rear controls.  You can see the original backward facing steering sticks on the right hand side.  On the C50R, you just swing the seat around to make the swap, and I think the C30R is the same. 

The finished mounting bracket for the return to center controls. 

I made the main plate of 1" AR500 instead of 3/4" mild, and added some gussets.  I'll have to add a picture of the added bits.  Otherwise, it's like for like. 

Great minds think alike.  I jumpered the hot side to a few gate hinges.  I did end up recovering most of my money from the crazy woman, but I would rather have had it all when the job was done.