premnayloon Posted June 7, 2015 Report Posted June 7, 2015 im putting up a mild steel fence just now using Tornado hinge joint 8/80/15, and it appears to me that there is a flaw with the wire, the 6th and 7 th wires, are tight at each end where they are joined with gripples, but there is around a 10 meter stretch that those two wires are slack, is this an issue with me or the wire as either end is tight.
SimonE Posted June 7, 2015 Report Posted June 7, 2015 Hi Gordon, I will get Chris to speak to you tomorrow
premnayloon Posted June 7, 2015 Author Report Posted June 7, 2015 Cheers, I've tightened the wires on both sides with stretchers and then again with gripples tool, I call this problem deacera disease, in honour of the Mexican wire it had the same tendency.
Chris Posted June 8, 2015 Report Posted June 8, 2015 Hi Gordon. I'll send you a separate note on e-mail about what to do next. Its a bit lengthy to put on the forum. Chris.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.