RCCM Posted January 12, 2016 Report Share Posted January 12, 2016 I have one of the blue trewhella monkey strainers which is about 2 or 3 years old and gets used mostly for box strainers and stuff using 2.5mm ht but it has started slipping along the wire. The cams still have plenty of bite and close up way beyond 2.5mm and no obvious groove has been worn too much so not sure why? Anyone got any ideas, they have been cleaned just in case of too much oil and muck but no better. Wondering about filing it all flat again to see if that helps. Annoyingly it's the grab on the frame end that's slipping otherwise I'd change the chain and grab bit. Thanks Link to comment Share on other sites More sharing options...
Rossco Posted January 13, 2016 Report Share Posted January 13, 2016 The new ones are rubbish and they are not the company they where get rid and get some strainrite ones Link to comment Share on other sites More sharing options...
premnayloon Posted January 13, 2016 Report Share Posted January 13, 2016 I'm sure I had a set did the same, I bought them from an auction new, sold then.private for a profit, Link to comment Share on other sites More sharing options...
RCCM Posted January 14, 2016 Author Report Share Posted January 14, 2016 I have strainrite ones too but for certain things prefer the trewhella ones Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.