Jump to content

Metal frame, ply lined hoarding gates


GeoffW

Recommended Posts

Posted

Hi Guys,

 

Can anyone please help and recommend a supplier who has fast turn around for manufacturing the above?

Posted

Where abouts in the country are you? One of our suppliers had some in the back of a shed, they may be all gone now. They are based in South Bucks

 

They weren't cheap mind but well made and wanted taking down properly for re erecting at the next site.

Posted

Hi guys, we're spread from Herefordshire to Oxfordshire, so Bucks is no prob, for a job in London. Would be grateful to speak to your guy who might have some in his shed?

 

Thanks Front Row will do. What could I trade you for a spec if you have one?

Posted

A beer or two. Ha ha. Spec depends on how big it is really, the bigger and heavier the gate the stronger it needs to be. From experience, use good strong hanging posts, plenty in the ground and go for the larger hinges and eyes. Use the inch ones not the three quarter. Our last set were 2.4 high and 6 metre wide, clad with 19mm osb. I think the posts were 100mm x 100mm so not that big but were 10mm thick. I believe the frames was made out of 100x60mm box, but not sure how thick. They were heavy though.

Posted

Private message me your number and I'll call them in the morning. Will either call you back or pass your number for them to call you.

 

He can do your ply and cover strips too, might even run it into the big smoke depending where.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...