Rossco Posted February 27, 2016 Report Share Posted February 27, 2016 Oct posts are they easy to work with drive staples and drive in the ground your thoughts people thanks Link to comment Share on other sites More sharing options...
premnayloon Posted February 27, 2016 Report Share Posted February 27, 2016 I've used them on three occasions, The wood is very consistent no knots I've heard of issues of them splitting but barbed staples should prevent that being an issue, I never had one split, or snap, the strainer can be quite dirty with creosote, Link to comment Share on other sites More sharing options...
ST61 Posted February 28, 2016 Report Share Posted February 28, 2016 Good stuff to work with as "Premnay Loon" says never had one split while stapeling , although i did manage to break one while driving it in. Although to be fair it was very hard and i was being a bit ambitious with the post knocker. Need to watch while driving in strainers as there is a fair amount of spray comes off them, i used a full face grinding mask as protection, some guys put a rag over the strainer to stop the spray. Link to comment Share on other sites More sharing options...
premnayloon Posted February 28, 2016 Report Share Posted February 28, 2016 Or an old manure bag over the top of strainer the posts it isn't really an issue Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.