Protech post caps

[Ajmoore1]

Hi chaps

 

I seen on Facebook somewhere that protech were doing a new post cap for square post. Has anybody got one or used one. I am thinking of getting one to go on my p230 as got a job doing a lot of post and rail and thought it might help.

 

Cheers in advance

[Goaty]

Can only speak from my experience with the Bryce adapt a cap with hydraulic twist. I would put it on to do ten posts. A lot less physical strain on my body trying to argue with an unyielding post.

[HenryG]

I've got a hydraulic twister for my machine but never use it purely because you can't see the top of the posts, so more difficult to keep right height with previous posts and if it's in line...... Just find it easier to use traditional post plate with manual fork twister..... But just my opinion.

[RED STAG]

I have one  defiantly helps if you’re doing a lot

[Goaty]

I've got a hydraulic twister for my machine but never use it purely because you can't see the top of the posts, so more difficult to keep right height with previous posts and if it's in line...... Just find it easier to use traditional post plate with manual fork twister..... But just my opinion.

I painted a "red go faster stripe" round mine where the top of the post is.

[Ajmoore1]

Ordered one so will report back with how i get on with it. Hope it doesn't end up being an expensive bit of metal in the scrap pile! Might have a go at fitting a little ram on it to make it hydraulic.